T-MEL-001 measures the melting point of crystalline materials using capillary samples, a liquid heat-transfer bath and programmed heating. The operator observes melting and records onset and completion temperatures.
Key features
- Five selectable linear heating rates
- Temperature preset retained between operating sessions
- Live temperature display and manual onset/end recording keys
- Audible notification after the preset-temperature stabilization delay
Technical Information
| Measurement range | ambient–270 °C |
|---|
| Preset temperature | ambient–250 °C |
|---|
| Heating rates | 0.5 / 1.0 / 1.5 / 2.0 / 3.0 °C/min |
|---|
| Heating-rate deviation | <5% |
|---|
| Accuracy below 200 °C | ≤±0.5 °C |
|---|
| Accuracy above 200 °C | ≤±1.0 °C |
|---|
| Heat-transfer liquid | Methyl silicone oil |
|---|
| Bath vessel | 250 mL tall-form beaker |
|---|
| Operating environment | 20±10 °C |
|---|
| Power supply | 220 V±10%; 50 Hz |
|---|
| Power consumption | <200 W |
|---|
Download the detailed product datasheet for full specifications and configuration information.
Standard Configuration
The documented arrangement uses a 250 mL tall-form beaker and methyl silicone oil as the heat-transfer medium. Confirm the supplied beaker, oil quantity, capillaries and complete packing list in the quotation.
Optional Accessories
No separate optional-accessory list is documented. Request compatible replacement capillaries and bath components as required; confirm availability before ordering.
Selection / Ordering Information
Specify the expected melting-temperature range, sample type, applicable test method and electrical supply. The accuracy at exactly 200 °C is not defined in the available specification. Confirm this boundary when relevant. Observation and recording are manual; automatic optical detection is not established.
Downloads
Download the detailed product datasheet for full specifications and configuration information.
Download PDF — English · PDF
