Programmable fan-circulated incubators with 40–1001 L chambers, ambient +5 to 85 °C control and model-specific thermal tolerances.
- LCD controller: 10 segments and 100 cycles
- Six fan-speed settings
- Standard RS-485 interface
Representative exterior view. Cabinet dimensions, observation-door design and shelf quantities vary by model; consult the specification table.
Technical Information
| Parameter | Value |
|---|
| Temperature range | Ambient +5 to 85 °C |
| Temperature resolution | 0.1 °C |
| Electrical supply | AC 220 V ±10% / 50 Hz ±2% |
| Timer range | 0–9999 min/h |
| Model | Chamber volume (L) | Input power (W) | Shelves: supplied / maximum |
|---|
| PT-INC-038 | 40 | 300 | 2/4 |
| PT-INC-039 | 77 | 450 | 2/5 |
| PT-INC-040 | 142 | 450 | 3/7 |
| PT-INC-041 | 234 | 750 | 3/10 |
| PT-INC-042 | 452 | 1000 | 4/18 |
| PT-INC-043 | 655 | 1500 | 4/18 |
| PT-INC-044 | 1001 | 2250 | 4/18 |
| Model | Temperature fluctuation | Temperature uniformity |
|---|
| PT-INC-038 | ±0.5 °C (37 °C) | ±1 °C (37 °C) |
| PT-INC-039 | ±0.5 °C (37 °C) | ±1 °C (37 °C) |
| PT-INC-040 | ±0.5 °C (37 °C) | ±1 °C (37 °C) |
| PT-INC-041 | ±0.5 °C (37 °C) | ±1 °C (37 °C) |
| PT-INC-042 | ±0.8 °C (37 °C) | ±2% |
| PT-INC-043 | ±0.8 °C (37 °C) | ±2% |
| PT-INC-044 | ±0.8 °C (37 °C) | ±2% |
Standard Configuration
Stainless steel chamber, adjustable shelves, LCD temperature/timer controller, 10-segment/100-cycle programming, six fan speeds, RS-485, overtemperature alarm and power-restoration memory. The observation window is documented only for PT-INC-038 to PT-INC-041; glazing on the three larger models requires confirmation.
Optional Accessories
Confirm additional shelves and any required accessories in the quotation. Lighting, UV lamps and software are not listed as supplied.
Downloads
Download the complete datasheet for model specifications and configuration details.
Download PDF - English
Selection / Ordering Information
Specify the model, sample or application, working temperature and required shelf arrangement. Confirm electrical supply and the final configuration before ordering.
